New HDF40 Hinged Frame, Flexible Cutterbar Draper

Specifications

Compare >>> Select up to 2 models to compare specifications

John DeereHDF40 Hinged Frame, Flexible Cutterbar Draper

Add Model --Please Select-- HD35F (Model year 2025) HD45F (Model year 2025) HD50F (Model year 2025)

Add Model --Please Select-- HD35F (Model year 2025) HD45F (Model year 2025) HD50F (Model year 2025)

Cutterbar length	12.2 m 40 ft
Knife drive	Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in.
Knife speed	X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min
Pickup reel operating speeds	8-70 rpm
Draper belts speed control	Hydraulic from cab (side belts only)

Type	Hinged frame flexible cutterbar

Type	Straight-line knife drive system
Length	12.2 m 40 ft
Knife drive	Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in.
Knife speed	X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min
Cutterbar tilt
Base skid shoe height	3.8 cm 1.5 in.

General
Number of slats	Six bat poly
Fingers	Nylon
Diameter	106.7 cm 42 in.
Height control	Hydraulic
Speed control	Hydraulic
Reel lift	Off the cutterbar: 100.6 cm 39.6 in.
Reel fore and aft	Fore of the cutterbar: 26.4 cm 10.4 in.
Fore of the cutterbar
Reel resume	Base
Reel reverse	Base
Operating speeds	8-70 rpm
Operating speeds (54-in. reel)

Number of slats
Diameter
Height control
Speed control
Operating speeds

Width	Side belts: 5.1 m 16.8 ft Center belts: 200 cm 79 in.
Belt depth	100 cm 39.8 in.
Cleat height	19 mm 0.75 in.
Operating speed
Speed control	Hydraulic from cab (side belts only)
Center belt reverse	Base

Diameter	40.6 cm 16 in.
Feed drum fingers	Heavy-duty and round with breakaway notch and retainer Diameter: 16 mm 0.625 in.
Number of fingers	18
Auger finger platform	Triple chevron, retracting
Finger reach	152 mm 6 in.
Drum/auger reverse	Base
Operating speed	Low speed: 200 rpm High speed: 240 rpm
Center cleanout door	Base

Type	Electrohydraulic
Header height sensing on the ground	Base
Header height sensing off the ground	Base

Type	Optional: hydraulic drive 250-350 rpm
Fingered augers	Optional
Size	Diameter: 43.2 cm 17 in.

Platform length	13.1 m 42.8 ft
Overall operating depth	With dividers: 3.2 m 10.6 ft
Transport width, field position
Transport width on wheel, less dividers
Transport length, hitch extended

Date collected	24 Mar 2021